Home About Us Products Servers Contact  

You are in Embedded Computing > Single Board Computers

Intel® Pentium® 4 or Celeron® (D) processor based PICMG 64-bit SBC with DDR 400 SDRAM, AGP 8X VGA, Dual Gigabit Ethernet and Audio

ROBO-8714VG2A Features

* Intel® Pentium® 4 processor with Hyper-
Threading technology runs at 800MHz FSB
* ECC function for data sensitive application
* External Bus supports up to 64-bit/66MHz
PCI-X bus for driving higher speed line cards
* ATI M9 graphics support dual view of LCD/CRT, TV/CRT, LCD/LCD and LCD/TV displays configuration
* Wire-speed Gigabit Ethernet based on
Communication Streaming Architecture
(CSA) with double throughput than PCI based Ethernet

ROBO-8714VG2A Specification

CPU CPU & Package: Intel® Pentium® 4 or Celeron® (D) processor in the mPGA478 package
FSB: 800/533/400MHz
Chipset Intel® 875P and 6300ESB
Memory - Up to 2GB dual channel DDR 400/333/266 SDRAM on two 184-pin DIMM sockets - ECC support
Display - ATI Mobility M9 graphics controller
* 64MB display memory
* TMDS & LVDS interfaces support
* Dual View support
* TV out
Ethernet - Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet port
- Gigabit Ethernet connected to CSA and PCI interfaces
- Two RJ-45 connectors with two LED indicators on bracket
Audio AC’97 2.2 Audio
Expansion Interface N/A
ISA Bus 64mA high driving ISA bus interface to backplane
EIDE Support four EIDE devices with Ultra DMA 100/66/33
Solid State Disk - One Type II CF socket
- On secondary EIDE channel
- Bootable for no drives on primary channel
I/O - Support two SATA 150 devices
- Two serial (selectable RS-232/422/485x1), one parallel, one IrDA and four USB 2.0 ports
- 8 high driving GPIO (programmable GPI or GPO)
- One 6-pin mini-DIN connector for keyboard and mouse
- One 5-pin header for external keyboard connection
ACPI Function - ATX function with 4-pin header connect to backplane
- Modem-Ring-On and Wake-On-LAN
Hardware Monitoring System monitor (fan, temperature, voltage) Watchdog Timer Programmable via software from 0.5 sec. to 254.5 min.
Power Requirement Typical: [email protected]; +12V(CPU)@5.7A; +12V(System)@0.8A
Mechanical Dimension : 338.5(L) x 122(W) mm; 13.33"(L) x 4.8" (W)
PCB: 8-layer
Environment Operating Temperature: 0 to 55oC
Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing
Approval CE, FCC Class A

ROBO-8714VG2A Ordering Information

* ROBO-8714VG2A Socket 478 Pentium® 4 or Celeron® (D) processor based PICMG SBC with DDR 400 SDRAM, M9 w/64MB via AGP 8X, dual Gigabit Ethernet and audio DVI-D Cable TMDS adapter cable for DVI interface flat panel
* PA-M1ATU Multimedia kit for P4 SBC with audio, TV out and USB ports Cable-HDD-SATA Adapter cable for hard drive type power connector to SATA power connector

Click image to enlarge

Get Price


Copyright UCS.co.uk 1997-2013. UCS is a trading name of Lilliput UK Ltd. Lilliput UK Ltd also operates: Car Computer, Cabcast

B Server